diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 7dfa520..bbf4228 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -24,10 +24,6 @@
 	bool "Ethernut5 board"
 	select CPU_ARM926EJS
 
-config TARGET_TNY_A9260
-	bool "Caloa TNY A9260 board"
-	select CPU_ARM926EJS
-
 config TARGET_SNAPPER9260
 	bool "Support snapper9260"
 	select CPU_ARM926EJS
@@ -35,10 +31,6 @@
 	select DM_SERIAL
 	select DM_GPIO
 
-config TARGET_AFEB9260
-	bool "Support afeb9260"
-	select CPU_ARM926EJS
-
 config TARGET_AT91SAM9261EK
 	bool "Atmel at91sam9261 reference board"
 	select CPU_ARM926EJS
@@ -59,10 +51,6 @@
 	bool "Ronetix pm9263 board"
 	select CPU_ARM926EJS
 
-config TARGET_SBC35_A9G20
-	bool "Support sbc35_a9g20"
-	select CPU_ARM926EJS
-
 config TARGET_STAMP9G20
 	bool "Support stamp9g20"
 	select CPU_ARM926EJS
@@ -155,11 +143,8 @@
 source "board/atmel/sama5d4ek/Kconfig"
 source "board/BuS/eb_cpux9k2/Kconfig"
 source "board/eukrea/cpuat91/Kconfig"
-source "board/afeb9260/Kconfig"
 source "board/bluewater/snapper9260/Kconfig"
 source "board/BuS/vl_ma2sc/Kconfig"
-source "board/calao/sbc35_a9g20/Kconfig"
-source "board/calao/tny_a9260/Kconfig"
 source "board/calao/usb_a9263/Kconfig"
 source "board/egnite/ethernut5/Kconfig"
 source "board/esd/meesc/Kconfig"
diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
index efb53d6..5e0c0f5 100644
--- a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c
@@ -166,7 +166,7 @@
 	at91_set_b_periph(AT91_PIO_PORTA, 25, 0);	/* ERX2 */
 	at91_set_b_periph(AT91_PIO_PORTA, 26, 0);	/* ERX3 */
 	at91_set_b_periph(AT91_PIO_PORTA, 27, 0);	/* ERXCK */
-#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260)
+#if defined(CONFIG_AT91SAM9260EK)
 	/*
 	 * use PA10, PA11 for ETX2, ETX3.
 	 * PA23 and PA24 are for TWI EEPROM
diff --git a/board/afeb9260/Kconfig b/board/afeb9260/Kconfig
deleted file mode 100644
index fb64c9c..0000000
--- a/board/afeb9260/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_AFEB9260
-
-config SYS_BOARD
-	default "afeb9260"
-
-config SYS_CONFIG_NAME
-	default "afeb9260"
-
-endif
diff --git a/board/afeb9260/MAINTAINERS b/board/afeb9260/MAINTAINERS
deleted file mode 100644
index 337f302..0000000
--- a/board/afeb9260/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-AFEB9260 BOARD
-M:	Sergey Lapin <slapin@ossfans.org>
-S:	Maintained
-F:	board/afeb9260/
-F:	include/configs/afeb9260.h
-F:	configs/afeb9260_defconfig
diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile
deleted file mode 100644
index e0c3cd5..0000000
--- a/board/afeb9260/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= afeb9260.o
-obj-y	+= partition.o
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
deleted file mode 100644
index ea9575d..0000000
--- a/board/afeb9260/afeb9260.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <netdev.h>
-#include <net.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void afeb9260_nand_hw_init(void)
-{
-	unsigned long csa;
-	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
-	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-
-	/* Assign CS3 to NAND/SmartMedia Interface */
-	csa = readl(&matrix->ebicsa);
-	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
-	writel(csa, &matrix->ebicsa);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-		&smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-		AT91_SMC_MODE_DBW_8 |
-		AT91_SMC_MODE_TDF_CYCLE(2),
-		&smc->cs[3].mode);
-
-	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
-	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-
-#ifdef CONFIG_MACB
-static void afeb9260_macb_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-
-
-	/* Enable EMAC clock */
-	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
-
-
-	/*
-	 * Disable pull-up on:
-	 *	RXDV (PA17) => PHY normal mode (not Test mode)
-	 *	ERX0 (PA14) => PHY ADDR0
-	 *	ERX1 (PA15) => PHY ADDR1
-	 *	ERX2 (PA25) => PHY ADDR2
-	 *	ERX3 (PA26) => PHY ADDR3
-	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
-	 *
-	 * PHY has internal pull-down
-	 */
-	writel(pin_to_mask(AT91_PIN_PA14) |
-	       pin_to_mask(AT91_PIN_PA15) |
-	       pin_to_mask(AT91_PIN_PA17) |
-	       pin_to_mask(AT91_PIN_PA25) |
-	       pin_to_mask(AT91_PIN_PA26) |
-	       pin_to_mask(AT91_PIN_PA28),
-	       &pioa->pudr);
-
-	at91_phy_reset();
-
-	/* Re-enable pull-up */
-	writel(pin_to_mask(AT91_PIN_PA14) |
-	       pin_to_mask(AT91_PIN_PA15) |
-	       pin_to_mask(AT91_PIN_PA17) |
-	       pin_to_mask(AT91_PIN_PA25) |
-	       pin_to_mask(AT91_PIN_PA26) |
-	       pin_to_mask(AT91_PIN_PA28),
-	       &pioa->puer);
-
-	at91_macb_hw_init();
-}
-#endif
-int board_early_init_f(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	/* Enable clocks for all PIOs */
-	writel((1 << ATMEL_ID_PIOA) |
-		(1 << ATMEL_ID_PIOB) |
-		(1 << ATMEL_ID_PIOC),
-		&pmc->pcer);
-	return 0;
-}
-int board_init(void)
-{
-	/* arch number of AT91SAM9260EK-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_AFEB9260;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	at91_seriald_hw_init();
-#ifdef CONFIG_CMD_NAND
-	afeb9260_nand_hw_init();
-#endif
-	at91_spi0_hw_init((1 << 0) | (1 << 1));
-#ifdef CONFIG_MACB
-	afeb9260_macb_hw_init();
-#endif
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(
-	(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x01);
-#endif
-	return rc;
-}
diff --git a/board/afeb9260/config.mk b/board/afeb9260/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/afeb9260/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/afeb9260/partition.c b/board/afeb9260/partition.c
deleted file mode 100644
index 6b71477..0000000
--- a/board/afeb9260/partition.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0x00000000, 0x000041FF, FLAG_PROTECT_CLEAR, 0, "Bootstrap"},
-	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-	{0x00008400, 0x00041FFF, FLAG_PROTECT_CLEAR, 0, "U-Boot"},
-};
diff --git a/board/calao/sbc35_a9g20/Kconfig b/board/calao/sbc35_a9g20/Kconfig
deleted file mode 100644
index 37ecfb5..0000000
--- a/board/calao/sbc35_a9g20/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_SBC35_A9G20
-
-config SYS_BOARD
-	default "sbc35_a9g20"
-
-config SYS_VENDOR
-	default "calao"
-
-config SYS_CONFIG_NAME
-	default "sbc35_a9g20"
-
-endif
diff --git a/board/calao/sbc35_a9g20/MAINTAINERS b/board/calao/sbc35_a9g20/MAINTAINERS
deleted file mode 100644
index 0ac8225..0000000
--- a/board/calao/sbc35_a9g20/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-SBC35_A9G20 BOARD
-#M:	Albin Tonnerre <albin.tonnerre@free-electrons.com>
-S:	Orphan (since 2014-06)
-F:	board/calao/sbc35_a9g20/
-F:	include/configs/sbc35_a9g20.h
-F:	configs/sbc35_a9g20_eeprom_defconfig
-F:	configs/sbc35_a9g20_nandflash_defconfig
diff --git a/board/calao/sbc35_a9g20/Makefile b/board/calao/sbc35_a9g20/Makefile
deleted file mode 100644
index 9ae2d24..0000000
--- a/board/calao/sbc35_a9g20/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= sbc35_a9g20.o
-obj-$(CONFIG_ATMEL_SPI)	+= spi.o
diff --git a/board/calao/sbc35_a9g20/config.mk b/board/calao/sbc35_a9g20/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/calao/sbc35_a9g20/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
deleted file mode 100644
index 2074a93..0000000
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free-Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-#ifdef CONFIG_CMD_NAND
-static void sbc35_a9g20_nand_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
-	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-	unsigned long csa;
-
-	/* Enable CS3 */
-	csa = readl(&matrix->ebicsa);
-	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
-	writel(csa, &matrix->ebicsa);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-		&smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
-		AT91_SMC_MODE_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
-		AT91_SMC_MODE_DBW_8 |
-#endif
-		AT91_SMC_MODE_TDF_CYCLE(2),
-		&smc->cs[3].mode);
-
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
-	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
-	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void sbc35_a9g20_macb_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
-
-	/* Enable EMAC clock */
-	writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
-
-	/*
-	 * Disable pull-up on:
-	 *	RXDV (PA17) => PHY normal mode (not Test mode)
-	 *	ERX0 (PA14) => PHY ADDR0
-	 *	ERX1 (PA15) => PHY ADDR1
-	 *	ERX2 (PA25) => PHY ADDR2
-	 *	ERX3 (PA26) => PHY ADDR3
-	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
-	 *
-	 * PHY has internal pull-down
-	 */
-	writel(pin_to_mask(AT91_PIN_PA14) |
-	       pin_to_mask(AT91_PIN_PA15) |
-	       pin_to_mask(AT91_PIN_PA17) |
-	       pin_to_mask(AT91_PIN_PA25) |
-	       pin_to_mask(AT91_PIN_PA26) |
-	       pin_to_mask(AT91_PIN_PA28),
-	       &pioa->pudr);
-
-	at91_phy_reset();
-
-	/* Re-enable pull-up */
-	writel(pin_to_mask(AT91_PIN_PA14) |
-	       pin_to_mask(AT91_PIN_PA15) |
-	       pin_to_mask(AT91_PIN_PA17) |
-	       pin_to_mask(AT91_PIN_PA25) |
-	       pin_to_mask(AT91_PIN_PA26) |
-	       pin_to_mask(AT91_PIN_PA28),
-	       &pioa->puer);
-
-	at91_macb_hw_init();
-}
-#endif
-
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	at91_seriald_hw_init();
-	sbc35_a9g20_nand_hw_init();
-#ifdef CONFIG_ATMEL_SPI
-	at91_spi0_hw_init(1 << 4 | 1 << 5);
-#endif
-#ifdef CONFIG_MACB
-	sbc35_a9g20_macb_hw_init();
-#endif
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(
-		(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
-#endif
-	return rc;
-}
diff --git a/board/calao/sbc35_a9g20/spi.c b/board/calao/sbc35_a9g20/spi.c
deleted file mode 100644
index 254c7a3..0000000
--- a/board/calao/sbc35_a9g20/spi.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_spi.h>
-#include <asm/arch/gpio.h>
-#include <spi.h>
-
-#define SBC_A9260_CS0_PIN	AT91_PIN_PA3
-#define SBC_A9260_CS1_PIN	AT91_PIN_PC11
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && (cs == 1 || cs == 0);
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	if(slave->cs == 0)
-		at91_set_gpio_value(SBC_A9260_CS0_PIN, 0);
-	else if(slave->cs == 1)
-		at91_set_gpio_value(SBC_A9260_CS1_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	if(slave->cs == 0)
-		at91_set_gpio_value(SBC_A9260_CS0_PIN, 1);
-	else if(slave->cs == 1)
-		at91_set_gpio_value(SBC_A9260_CS1_PIN, 1);
-}
-
-void spi_init_f(void)
-{
-	/* everything done in board_init */
-}
diff --git a/board/calao/tny_a9260/Kconfig b/board/calao/tny_a9260/Kconfig
deleted file mode 100644
index 2b66329..0000000
--- a/board/calao/tny_a9260/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_TNY_A9260
-
-config SYS_BOARD
-	default "tny_a9260"
-
-config SYS_VENDOR
-	default "calao"
-
-config SYS_CONFIG_NAME
-	default "tny_a9260"
-
-endif
diff --git a/board/calao/tny_a9260/MAINTAINERS b/board/calao/tny_a9260/MAINTAINERS
deleted file mode 100644
index 1f24e39..0000000
--- a/board/calao/tny_a9260/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-TNY_A9260 BOARD
-#M:	Albin Tonnerre <albin.tonnerre@free-electrons.com>
-S:	Orphan (since 2014-06)
-F:	board/calao/tny_a9260/
-F:	include/configs/tny_a9260.h
-F:	configs/tny_a9260_eeprom_defconfig
-F:	configs/tny_a9260_nandflash_defconfig
-F:	configs/tny_a9g20_eeprom_defconfig
-F:	configs/tny_a9g20_nandflash_defconfig
diff --git a/board/calao/tny_a9260/Makefile b/board/calao/tny_a9260/Makefile
deleted file mode 100644
index 55a6157..0000000
--- a/board/calao/tny_a9260/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= tny_a9260.o
-obj-$(CONFIG_ATMEL_SPI)	+= spi.o
diff --git a/board/calao/tny_a9260/config.mk b/board/calao/tny_a9260/config.mk
deleted file mode 100644
index e554a45..0000000
--- a/board/calao/tny_a9260/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23f00000
diff --git a/board/calao/tny_a9260/spi.c b/board/calao/tny_a9260/spi.c
deleted file mode 100644
index 26ba5f5..0000000
--- a/board/calao/tny_a9260/spi.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_spi.h>
-#include <asm/arch/gpio.h>
-#include <spi.h>
-
-#define TNY_A9260_CS_PIN	AT91_PIN_PC11
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	at91_set_gpio_value(TNY_A9260_CS_PIN, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	at91_set_gpio_value(TNY_A9260_CS_PIN, 1);
-}
-
-void spi_init_f(void)
-{
-	/* everything done in board_init */
-}
diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c
deleted file mode 100644
index 337be43..0000000
--- a/board/calao/tny_a9260/tny_a9260.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/at91sam9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void tny_a9260_nand_hw_init(void)
-{
-	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
-	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
-	unsigned long csa;
-
-	/* Assign CS3 to NAND/SmartMedia Interface */
-	csa = readl(&matrix->ebicsa);
-	csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
-	writel(csa, &matrix->ebicsa);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-		&smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
-		AT91_SMC_MODE_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
-		AT91_SMC_MODE_DBW_8 |
-#endif
-		AT91_SMC_MODE_TDF_CYCLE(2),
-		&smc->cs[3].mode);
-
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-
-	/* Configure RDY/BSY */
-	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
-
-	/* Enable NandFlash */
-	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-
-int board_init(void)
-{
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	at91_seriald_hw_init();
-	tny_a9260_nand_hw_init();
-	at91_spi0_hw_init(1 << 5);
-	return 0;
-}
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(
-		(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 690c9b0..aeb0645 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -328,7 +328,7 @@
 	ulong ptr;
 
 	/* Get stack position: use 8-byte alignment for ABI compliance */
-	ptr = CONFIG_SPL_STACK_R - sizeof(gd_t);
+	ptr = CONFIG_SPL_STACK_R_ADDR - sizeof(gd_t);
 	ptr &= ~7;
 	new_gd = (gd_t *)ptr;
 	memcpy(new_gd, (void *)gd, sizeof(gd_t));
diff --git a/configs/afeb9260_defconfig b/configs/afeb9260_defconfig
deleted file mode 100644
index 694d24d..0000000
--- a/configs/afeb9260_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_AFEB9260=y
diff --git a/configs/sbc35_a9g20_eeprom_defconfig b/configs/sbc35_a9g20_eeprom_defconfig
deleted file mode 100644
index 6e7589c..0000000
--- a/configs/sbc35_a9g20_eeprom_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_SBC35_A9G20=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM"
diff --git a/configs/sbc35_a9g20_nandflash_defconfig b/configs/sbc35_a9g20_nandflash_defconfig
deleted file mode 100644
index 3092ea3..0000000
--- a/configs/sbc35_a9g20_nandflash_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_SBC35_A9G20=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
diff --git a/configs/tny_a9260_eeprom_defconfig b/configs/tny_a9260_eeprom_defconfig
deleted file mode 100644
index bf5eaff..0000000
--- a/configs/tny_a9260_eeprom_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_EEPROM"
diff --git a/configs/tny_a9260_nandflash_defconfig b/configs/tny_a9260_nandflash_defconfig
deleted file mode 100644
index 4fad017..0000000
--- a/configs/tny_a9260_nandflash_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH"
diff --git a/configs/tny_a9g20_eeprom_defconfig b/configs/tny_a9g20_eeprom_defconfig
deleted file mode 100644
index 03a0a34..0000000
--- a/configs/tny_a9g20_eeprom_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_EEPROM"
diff --git a/configs/tny_a9g20_nandflash_defconfig b/configs/tny_a9g20_nandflash_defconfig
deleted file mode 100644
index 82bedff..0000000
--- a/configs/tny_a9g20_nandflash_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_TNY_A9260=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 59d2142..aa2b07b 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,14 +12,17 @@
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
-korat            powerpc     ppc4xx         -           -           Larry Johnson <lrj@acm.org>
-galaxy5200       powerpc     mpc5xxx        -           -           Eric Millbrandt <emillbrandt@dekaresearch.com>
-W7OLMC           powerpc     ppc4xx         -           -           Erik Theisen <etheisen@mindspring.com>
-W7OLMG           powerpc     ppc4xx         -           -           Erik Theisen <etheisen@mindspring.com>
-aev              powerpc     mpc5xxx        -           -
-TB5200           powerpc     mpc5xxx        -           -
-JSE              powerpc     ppc4xx         -           -           Stephen Williams <steve@icarus.com>
-BC3450           powerpc     mpc5xxx        -           -
+afeb9260         arm         arm926ejs      -           -           Sergey Lapin <slapin@ossfans.org>
+tny_a9260        arm         arm926ejs      -           -           Albin Tonnerre <albin.tonnerre@free-electrons.com>
+sbc35_a9g20      arm         arm926ejs      -           -           Albin Tonnerre <albin.tonnerre@free-electrons.com>
+korat            powerpc     ppc4xx         5043045d    2015-03-17  Larry Johnson <lrj@acm.org>
+galaxy5200       powerpc     mpc5xxx        41eb4e5c    2015-03-17  Eric Millbrandt <emillbrandt@dekaresearch.com>
+W7OLMC           powerpc     ppc4xx         6beecd5d    2015-03-17  Erik Theisen <etheisen@mindspring.com>
+W7OLMG           powerpc     ppc4xx         6beecd5d    2015-03-17  Erik Theisen <etheisen@mindspring.com>
+aev              powerpc     mpc5xxx        470ee8b1    2015-03-17
+TB5200           powerpc     mpc5xxx        470ee8b1    2015-03-17
+JSE              powerpc     ppc4xx         2da8137b    2015-03-17  Stephen Williams <steve@icarus.com>
+BC3450           powerpc     mpc5xxx        f8296d69    2015-03-17
 hawkboard        arm         arm926ejs      cb957cda    2015-02-24  Syed Mohammed Khasim <sm.khasim@gmail.com>:Sughosh Ganu <urwithsughosh@gmail.com>
 tnetv107x        arm         arm1176        50b82c4b    2015-02-24  Chan-Taek Park <c-park@ti.com>
 a320evb          arm         arm920t        29fc6f24    2015-02-24  Po-Yu Chuang <ratbert@faraday-tech.com>
diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
deleted file mode 100644
index 932a309..0000000
--- a/include/configs/afeb9260.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2008 Sergey Lapin <slapin@ossfans.org>
- *
- * Configuation settings for the AFEB9260 board.
- * Based on configuration for AT91SAM9260-EK
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-#define CONFIG_AT91SAM9260		/* Atmel AT91SAM9260 SoC*/
-#include <asm/arch/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE		0x21f00000
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK		18429952	/* from 18.432 MHz crystal */
-#define CONFIG_SYS_AT91_SLOW_CLOCK		32768
-
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_AFEB9260			/* AFEB9260 Board	*/
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-#define CONFIG_AT91_PULLUP	1
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
-#define CONFIG_USART_ID		ATMEL_ID_SYS
-#define CONFIG_USART3		/* USART 3 is DBGU */
-
-#define CONFIG_BOOTDELAY	3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE	1
-#define CONFIG_BOOTP_BOOTPATH		1
-#define CONFIG_BOOTP_GATEWAY		1
-#define CONFIG_BOOTP_HOSTNAME		1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE		0x04000000	/* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
-#define AT91_SPI_CLK			15000000
-#define DATAFLASH_TCSS			(0x1a << 16)
-#define DATAFLASH_TCHS			(0x1 << 24)
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
-
-#endif
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_NET_RETRY_COUNT		20
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
-#define CONFIG_USB_STORAGE
-
-#define CONFIG_SYS_LOAD_ADDR			0x21000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			0x21e00000
-
-#define CONFIG_SYS_USE_DATAFLASH_CS1
-#define CONFIG_SYS_INIT_SP_ADDR		(ATMEL_BASE_SRAM1 + 0x1000 -\
-					GENERATED_GBL_DATA_SIZE)
-
-/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-#define CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-#define CONFIG_ENV_OFFSET		0x4200
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_BOOTCOMMAND	"nand read 0x21000000 0xa0000 0x200000; bootm"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 "			\
-				"root=/dev/mtdblock2 "			\
-				"rw rootfstype=jffs2 panic=20"
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_CBSIZE		256
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#endif
diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index dedb785..94981e7 100644
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -64,7 +64,7 @@
 #define CONFIG_BOOTARGS							\
 	"console=ttyS0,115200 earlyprintk "				\
 	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-	"256K(env),256k(evn_redundent),256k(spare),"			\
+	"256K(env),256k(env_redundent),256k(spare),"			\
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
 #endif
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 6c1bd30..e43795b 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -171,7 +171,7 @@
 #define CONFIG_BOOTARGS		\
 				"console=ttyS0,115200 earlyprintk "				\
 				"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
-				"256K(env),256k(evn_redundent),256k(spare),"			\
+				"256K(env),256k(env_redundent),256k(spare),"			\
 				"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 				"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
 
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
deleted file mode 100644
index e7c35ec..0000000
--- a/include/configs/sbc35_a9g20.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * Configuation settings for the Calao SBC35-A9G20 board
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* SoC type is defined in boards.cfg */
-#include <asm/hardware.h>
-#include <linux/sizes.h>
-
-#if defined(CONFIG_SYS_USE_NANDFLASH)
-#define CONFIG_ENV_IS_IN_NAND
-#else
-#define CONFIG_ENV_IS_IN_EEPROM
-#endif
-
-#define MACH_TYPE_SBC35_A9G20		1848
-#define CONFIG_MACH_TYPE		MACH_TYPE_SBC35_A9G20
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12.000 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* GPIO */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-#define CONFIG_AT91_GPIO
-
-/* Serial */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE               ATMEL_BASE_DBGU
-#define CONFIG_USART_ID                 ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_BOOTDELAY	3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_USB
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS	1
-#define CONFIG_SYS_SDRAM_BASE	ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE	0x04000000	/* 64 megs */
-#define CONFIG_SYS_INIT_SP_ADDR	(ATMEL_BASE_SRAM1 + 0x1000 - \
-				 GENERATED_GBL_DATA_SIZE)
-
-/* SPI EEPROM */
-#define CONFIG_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_ATMEL_SPI
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_SPI_M95XXX
-#define CONFIG_SYS_EEPROM_SIZE 0x10000
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-
-/* SPI RTC */
-#define CONFIG_CMD_DATE
-#define CONFIG_RTC_M41T94
-#define CONFIG_M41T94_SPI_BUS 0
-#define CONFIG_M41T94_SPI_CS 0
-
-/* NAND flash */
-#define CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			0x40000000
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH			1
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_AT91_WANTS_COMMON_PHY
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00500000	/* AT91SAM9260_UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x23e00000
-
-/* Env in EEPROM, bootstrap + u-boot in NAND*/
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET	0x20
-#define CONFIG_ENV_SIZE		0x1000
-#endif
-
-/* Env, bootstrap and u-boot in NAND */
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0x60000
-#define CONFIG_ENV_OFFSET_REDUND	0x80000
-#define CONFIG_ENV_SIZE			0x20000
-#endif
-
-#define CONFIG_BOOTCOMMAND	"nboot 0x21000000 0 400000"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mtdblock1 " \
-				"mtdparts=atmel_nand:16M(kernel)ro," \
-				"120M(rootfs),-(other) " \
-				"rw rootfstype=jffs2"
-
-
-#define CONFIG_SYS_PROMPT	"U-Boot> "
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP	1
-#define CONFIG_CMDLINE_EDITING	1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
-#endif
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
deleted file mode 100644
index 79c7fc5..0000000
--- a/include/configs/tny_a9260.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Copyright (C) 2009
- * Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
- *
- * Configuation settings for the Calao TNY-A9260 and TNY-A9G20 boards
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * SoC must be defined first, before hardware.h is included.
- * In this case SoC is defined in boards.cfg.
- */
-#include <asm/hardware.h>
-
-#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH)
-#define CONFIG_ENV_IS_IN_NAND
-#else
-#define CONFIG_ENV_IS_IN_EEPROM
-#endif
-
-/* Define actual evaluation board type from used processor type */
-#ifdef CONFIG_AT91SAM9G20
-# define CONFIG_TNY_A9G20
-# define MACH_TYPE_TNY_A9G20		2059
-# define CONFIG_MACH_TYPE		MACH_TYPE_TNY_A9G20
-#else
-# define CONFIG_TNY_A9260
-# define MACH_TYPE_TNY_A9260		2058
-# define CONFIG_MACH_TYPE		MACH_TYPE_TNY_A9260
-#endif
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_CMDLINE_TAG	        /* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define	CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_BOOTDELAY	3
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_USB
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE		0x04000000	/* 64 megs */
-# define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* SPI EEPROM */
-#define CONFIG_SPI
-#define CONFIG_CMD_SPI
-#define CONFIG_ATMEL_SPI
-
-#define CONFIG_CMD_EEPROM
-#define CONFIG_SPI_M95XXX
-#define CONFIG_SYS_EEPROM_SIZE 0x10000
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-
-/* NAND flash */
-#define CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC13
-
-/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-
-#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
-/* Env in EEPROM, bootstrap + u-boot in NAND*/
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET		0x20
-#define CONFIG_ENV_SIZE		        0x1000
-#endif
-
-/* Env, bootstrap and u-boot in NAND */
-#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET               0x60000
-#define CONFIG_ENV_OFFSET_REDUND        0x80000
-#define CONFIG_ENV_SIZE                 0x20000
-#endif
-
-#define CONFIG_BOOTCOMMAND	"nboot 0x21000000 0 400000"
-#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
-				"root=/dev/mtdblock1 " \
-				"mtdparts=atmel_nand:16M(kernel)ro," \
-				"120M(rootfs),-(other) " \
-				"rw rootfstype=jffs2"
-
-#define CONFIG_SYS_PROMPT	"U-Boot> "
-#define CONFIG_SYS_CBSIZE	256
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-
-#endif